Wintec Pro Webbers
Wintec Pro Webbers are a revolutionary synthetic stirrup strap made without buckles to reduce the lump under your thigh and provide closer contact to your horse.
They feature a webbing core for increased strength, and Equi-Suede on both the interior and exterior of the Webber, which further protects the flap of your saddle from wear.
What size Webbers do I need?
Webbers are sized in centimetres by overall length. The inch figures are a conversion for reference only.
- Kids Webber, 45 cm/18 in. Adjusts 29 to 38 cm (11.5 to 15 in). Equivalent to a 110 cm/44 in stirrup strap, and will fit shorter if needed.
- Size 0, 60 cm/24 in. Adjusts 38 to 53 cm (15 to 21 in). Equivalent to a 120 cm/48 in stirrup strap.
- Size 1, 70 cm/28 in. Adjusts 48 to 63 cm (19 to 25 in). Equivalent to a 140 cm/56 in stirrup strap, and will fit about 2.5 cm shorter.
- Size 2, 80 cm/32 in. Adjusts 58 to 74 cm (23 to 29.5 in). Equivalent to a 160 cm/64 in stirrup strap, and will fit longer.
The size code ends in the centimetre length, so a Size 0 Webber is a 60. If you are not sure, your saddle fitter or stockist can help you choose.
How do I fit them?
Take the sleeve off, then thread the looped end of your Wintec Webbers through the eye of your stirrup iron and replace the sleeve. Slide the loop over your stirrup bar, making sure your Webbers buckle below your saddle flap to avoid wear.
To secure the stirrup iron, fold the T-shaped buckle end up behind the iron and insert it into the I-shaped hole at your preferred length. Turn the buckle until the Webber sits flat and the buckle is secure, then pull the sleeve down firmly so the buckle is covered and your tack is protected.
To run them up, remove the T-shaped buckle from the riding slot and insert it in the hole at the very top of the Webber, up near your stirrup bar. You may need to lift the skirt of your saddle to see it. Run the stirrup iron up the front of the Webber, then tuck the folded Webber through the iron and pull down to secure.
Goes well with
- Standard version: Wintec Webbers
- Traditional straps: Wintec Pro Stirrup Straps
Read more
-
How do they differ from Wintec Webbers?
They do everything Wintec Webbers do, with Equi-Suede on both the inside and the outside, so they match Wintec saddles that have Equi-Suede.How do I fit them?
Take the sleeve off, thread the looped end through the eye of your stirrup iron and replace the sleeve. Slide the loop over your stirrup bar so the Webbers buckle below your saddle flap.How do I run them up?
Put the T-shaped buckle in the hole at the very top of the Webber, near the stirrup bar. Run the iron up the front, then tuck the folded Webber through the iron and pull down. -
Webbers are sized in centimetres by overall length, and the inch figures are a conversion for reference only. Size 0, 60 cm/24", adjusts 38 to 53 cm (15 to 21 in) and is equivalent to a 120 cm/48" stirrup strap. Size 1, 70 cm/28", adjusts 48 to 63 cm (19 to 25 in) and is equivalent to a 140 cm/56" stirrup strap, and will fit about 2.5 cm shorter. Size 2, 80 cm/32", adjusts 58 to 74 cm (23 to 29.5 in) and is equivalent to a 160 cm/64" stirrup strap, and will fit longer. If you are not sure, your saddle fitter or stockist can help you choose.
-
- Wipe or rinse off sweat and dirt and let them dry naturally.
- A stiff bristle brush lifts dirt from the Equi-Suede and restores the nap, and Wintec Saddle Cleaner is there for a deeper clean.
-
We take care with our photos, but the saddles and gear in our lifestyle shots won't always be the exact product on this page. Some are there to show off a feature, like being weatherproof or easy to clean.
The product photos and description are the best guide to what you're buying. If you're not sure, just get in touch and we'll check for you.
Key features
- No buckles, so no lump under your thigh
- Webbing core for extra strength
- Equi-Suede on both the inside and the outside
- Equi-Suede interior protects your saddle flap from wear
- Matches Wintec saddles featuring Equi-Suede
Pair with
Looking after it
Wipe or rinse off sweat and dirt and let them dry naturally.
A stiff bristle brush lifts dirt from the Equi-Suede and restores the nap, and Wintec Saddle Cleaner is there for a deeper clean.
Finding the right fit
Webbers are sized in centimetres by overall length, and the inch figures are a conversion for reference only. Size 0, 60 cm/24", adjusts 38 to 53 cm (15 to 21 in) and is equivalent to a 120 cm/48" stirrup strap. Size 1, 70 cm/28", adjusts 48 to 63 cm (19 to 25 in) and is equivalent to a 140 cm/56" stirrup strap, and will fit about 2.5 cm shorter. Size 2, 80 cm/32", adjusts 58 to 74 cm (23 to 29.5 in) and is equivalent to a 160 cm/64" stirrup strap, and will fit longer.
If you are not sure, your saddle fitter or stockist can help you choose.
Wintec Pro Webbers
If your saddle has Equi-Suede, these are the ones that match it.
Read more: Feel closer to the action with Wintec Webbers.
