Wintec Pro Stock Stirrup Straps
Recommended for use with the Wintec Pro Stock saddle. The traditional 1¼ inch (2.9 cm) design with a sleeve enables you to buckle down near the stirrup iron for reduced bulk under your thigh.
Please note: Wintec Pro Stock Stirrup Straps require the use of a stirrup iron with a 1¼ inch eye.
How to fit them
Start with the sleeve. Unfold the stirrup straps and keep the sleeve separate. With both logos facing you, thread the pointed end through the sleeve, then push the sleeve all the way up to just underneath the buckle.
Add your stirrup iron. Thread the pointed end through the eye of your stirrup iron with the logo facing downward. Keep pulling it through, all the way up through the sleeve and behind the buckle. Once you have buckled the straps at your preferred length, pull the pointed end through the buckle and back down through the sleeve. Both logos should now be visible again.
Get the buckle into position. Hold the stirrup straps loosely behind the buckle, as though your hand is a temporary stirrup bar, and pull the buckle down toward the iron. The sleeve should sit snug against the iron with the buckle just above it. Either put the excess through the eye of the iron once more, or fold it under the top of the iron and tuck the remaining length back up through the sleeve to secure.
Now you are ready to attach the stirrup straps to your saddle and enjoy your ride.
Goes well with
- The saddle: Wintec Pro Stock
- Slimline option: Wintec Slimline Stirrup Straps
Read more
-
How do I fit them?
With both logos facing you, thread the pointed end through the sleeve and push the sleeve up to just under the buckle. Then take it through the eye of the iron, back up through the sleeve and buckle at your length.Where should the buckle sit?
Pull the buckle down towards the iron so the sleeve sits snug against it with the buckle just above, then put the excess through the eye once more or tuck it back up through the sleeve.Which saddle and irons are they for?
They are recommended for the Wintec Pro Stock and need a stirrup iron with a 1¼ inch eye. -
Made to suit the Wintec Pro Stock, and they need a stirrup iron with a 1¼ inch eye. You set your length by buckling down near the iron, so the sleeve sits snug against it with the buckle just above.
-
- Wipe off sweat and dirt after riding and let the straps dry naturally away from direct heat before you store them.
-
We take care with our photos, but the saddles and gear in our lifestyle shots won't always be the exact product on this page. Some are there to show off a feature, like being weatherproof or easy to clean.
The product photos and description are the best guide to what you're buying. If you're not sure, just get in touch and we'll check for you.
Key features
- Traditional 1¼ inch design with a sleeve
- Buckles down near the stirrup iron, not under your thigh
- Less bulk under your leg on a long day
- Recommended for the Wintec Pro Stock
Pair with
Looking after your stirrup straps
Wipe off sweat and dirt after riding and let the straps dry naturally away from direct heat before you store them.
Finding the right fit
Made to suit the Wintec Pro Stock, and they need a stirrup iron with a 1¼ inch eye. You set your length by buckling down near the iron, so the sleeve sits snug against it with the buckle just above.
Wintec Pro Stock Stirrup Straps
- Traditional 1¼ inch design with a sleeve
- Buckles down near the stirrup iron, not under your thigh
- Less bulk under your leg on a long day
- Recommended for the Wintec Pro Stock
Read more: Feel closer to the action with Wintec Webbers.
